PolyPhaser

Used at transmitter sites the world over, PolyPhaser coaxial protectors allow permanent connection of antennas to radios without worry of lightning damage*. Unit is flange mounted for easy mounting to a flat conductive surface. Coaxial units block DC and are designed for single transmitters from 1.5 MHz to 700 MHz with UHF female surge side and UHF female protected side connectors. All Polyphaser units can be installed in KF7P Entry Panel Boxes or Junction Boxes. Mounting screws included with unit.

* Proper grounding and bonding techniques required; see tech page for more information.

Models Available: Price:

IS-50UX-C0, UHF connectors, 2kw (HF), 375w (VHF), 125w (UHF).

Be the first to review this product.

*****

Authority on Lightning and Surge Protection

PolyPhaser leads the market with its patented RF protection solutions, specifically supporting communications systems. Based on its extensive experience with multi-stage surge protection, PolyPhaser continuously expands its product offering to support the needs of advanced network applications with technologies such as DC Block DC Pass and Ultra Low PIM.

Coaxial RF and Grounding Protection Innovation

Through innovative RF engineering and manufacturing capabilities PolyPhaser has created a protection technology that virtually assures uninterrupted communications flow of data and information through global networks. PolyPhaser provides a technologically advanced solution designed to overcome the inherent weaknesses associated with gas tube and quarter-wave technology.

For nearly forty years PolyPhaser’s focus-on-the future business philosophy has been the cornerstone of our success. Whether using our standard patented lightning protection or customized solutions, PolyPhaser’s name is globally synonymous with high-quality and superior performance.

Looking for something specific? Contact us with your needs and we will find a Polyphaser solution!

Used at transmitter sites the world over, PolyPhaser coaxial protectors allow permanent connection of antennas to radios without worry of lightning damage*. Unit is bulkhead mounted in perpendicular ground bar such as KF7P PolyPhaser Mounting Bus. Coaxial units block DC and are designed for single transmitters from 1.5 MHz to 700 MHz with UHF female bulkhead connector on the surge side, and UHF female on the protected side. All Polyphaser units can be installed in KF7P Entry Panel Boxes or Junction Boxes. Mounting screws included with unit.

* Proper grounding and bonding techniques required; see tech page for more information.

Models Available: Price:

IS-B50HU-C0, UHF connectors, 3kw (HF), 500w (VHF), 250w (UHF).

Engineering specifications

Used at transmitter sites the world over, PolyPhaser coaxial protectors allow permanent connection of antennas to radios without worry of lightning damage*. Unit is flange mounted for easy mounting to a flat conductive surface. Coaxial units block DC and are designed for single transmitters from 1.5 MHz to 700 MHz with N female surge side and N female protected side connectors. All Polyphaser units can be installed in KF7P Entry Panel Boxes or Junction Boxes. Mounting screws included with unit.

* Proper grounding and bonding techniques required; see tech page for more information.

Models Available: Price:

IS-50NX-C0, N connectors, 2kw (HF), 375w (VHF), 125w (UHF).

Engineering specifications

Don’t forget to protect the 8 conductor rotator cable! PolyPhaser IS-RCT unit will shunt surges to ground on all 8 wires. Unit designed to operate rotator control wires or remote switch control wires up to 60 volts AC or DC at 2 amps. Unit has a single ground stud that also serves as a mounting point to a flat conductive surface. All Polyphaser units can be installed in KF7P Entry Panel Boxes or Junction Boxes.

Proper grounding and bonding techniques required; see tech page for more information.

Models Available: Price:

IS-RCT, screw terminals/8 wire, 60VAC/DC 2A

NEW! 90˚ mounting bracket for IS-RCT units, rotates unit so terminal strip is facing up.

Makes mounting and wiring duties much easier; comes with hardware to mount bracket

to conductive ground surface.

Engineering specifications

All PolyPhaser products can be mounted in Entry Panel or Junction boxes.

w4ghw photo

$91.95

$115.95

$86.95

$395.95

Used at transmitter sites the world over, PolyPhaser coaxial protectors allow permanent connection of antennas to radios without worry of lightning damage*. Unit is bulkhead mounted in perpendicular ground bar such as KF7P PolyPhaser Mounting Bus. Coaxial units block DC and are designed for single transmitters from 10 MHz to 1000 MHz with N female bulkhead connector on the surge side, and N female on the protected side. All Polyphaser units can be installed in KF7P Entry Panel Boxes or Junction Boxes. Mounting screws included with unit.

* Proper grounding and bonding techniques required; see tech page for more information.

Models Available: Price:

IS-B50LN-C2, N connectors, 1.5kw 10-50MHz, 375w 50-220 Mhz, 125w 220-700MHz,

50w 700-1000MHz.

Engineering specifications

$95.95

Used at transmitter sites the world over, PolyPhaser coaxial protectors allow permanent connection of antennas to radios without worry of lightning damage*. Unit is flange mounted for easy mounting to a flat conductive surface. Intended for CATV applications with 75 ohm coax, from 4 MHz to 900 MHz with F female surge side and F female protected side connectors. This unit features DC blocking (cannot be used with DC on coax to power pre-amps, etc.) All Polyphaser units can be installed in KF7P Entry Panel Boxes or Junction Boxes. Mounting screws included with unit.

* Proper grounding and bonding techniques required; see tech page for more information.

Models Available: Price:

IS-75F-C1, F connectors, 100w (HF), 100w (VHF), 25w (UHF).

Engineering specifications

$124.45

$10.00

Don’t forget to protect your data lines that enter/exit your radio room! Transtector DPR Series provides a full range of data line protection for Point to Point, Wi-Fi, WISP, backhaul and PoE enabled terminal applications. The DPR product family offers gas tube, SASD and hybrid technology options providing superior cost effective commercial grade surge protection for data speeds up to 1 Gb/s. All Polyphaser units can be installed in KF7P Entry Panel Boxes or Junction Boxes.

* Proper grounding and bonding techniques required; see tech page for more information.

Models Available: Price:

DPR-Base, RJ45 connectors, protection for all 8 lines, GbE

Engineering specifications

$69.95

Note: This model requires a mounting bus as seen in photo at right. They do not mount on a flat surface, i.e., on the copper sheet in an entry panel box. Mounting bus available here.

Note: This model requires a mounting bus. They do not mount on a flat surface, i.e., on the copper sheet in an entry panel box. Mounting bus available here.

OUT OF STOCK

NOTE: We recommend using the Morgan M-348 for protecting control lines.