$8.95
Slotted entry cover plate is a dandy little item. Delivered on time, easy to install, and for the average guy. My problem was the old nut behind the drill :). But the wife is pleased, and you know “a happy wife...” 73! W8JMI
*****
*****
Keep your XYL happy and organize your cabling at the same time with professional cable thru the wall entry plates. Available in four different styles, these low voltage entry systems can accommodate from one to twelve cables! Simple installation with basic tools as shown below. Features:
Questions or comments? Let me know what you think. Chris at KF7P dot com.
Cable scoop allows passage of up to eight RG8 sized cables. Comes with black mounting bracket, cable scoop, wall cover plate, and all necessary hardware. Can also mount to a single gang box.
NOTE: This is the same vertical style scoop just like the Double Entry Scoop below. However, the installation detail photos below show the double scoop. ***This device will pass 3 RG8 size cables with PL259’s easily, and a fourth cable of the same size with some effort. You can physically get up to 6 RG8 size cables through it without connectors.***
Using the mounting bracket as a guide. trace onto wall and cut out with a drywall saw. Make sure your cut lines are level!
Install mounting bracket in hole.
Attach by tightening included screws. “Wings” that are behind the bracket clamp the bracket to wall.
Attach cable scoop with included screws. Scoop can face IN or OUT.
Finally, put cover plate over scoop and attach with included screws. Done!
Installation is easy!
Tools needed: Keyhole or sheetrock saw, small level, phillips screwdriver, and flathead screwdriver. Takes 5 minutes.
1
2
3
4
$11.95
Double cable scoops allows passage of up to four RG8 sized cables per side for a total of eight. Comes with black mounting bracket, cable scoops, wall cover plate, and all necessary hardware. Can also mount to a double gang box.
***Each half of this device will pass 3 RG8 size cables with PL259’s easily, and a fourth cable of the same size with some effort. You can physically get up to 6 RG8 size cables through it without connectors.***
Using the mounting bracket as a guide. trace onto wall and cut out with a drywall saw. Make sure your cut lines are level!
Install mounting bracket in hole.
Attach by tightening included screws. “Wings” that are behind the bracket clamp the bracket to wall.
Attach cable scoop with included screws. Scoops can face IN or OUT.
Finally, put cover plate over scoop and attach with included screws. Done!
Installation is easy!
Tools needed: Keyhole or sheetrock saw, small level, phillips screwdriver, and flathead screwdriver. Takes 5 minutes.
1
2
3
4
5
$9.95
Similar to a single gang wall plate only larger, the slotted cover allows for a massive cable bundle of up to ten RG8 size cables to pass through the wall! Slotted cover is soft rubber which easily pushes out of the way when cables are passed through. Installation is very easy and takes only minutes.
Determine placement and cut 3.5” hole in wall with hole saw. Sheetrock saw also does the job.
Place slotted entry plate in hole and level.
Attach by tightening included screws. “Wings” that are behind the bracket clamp the bracket to wall. Done!
$3.45 ea.
Use these cable hangers to route and support your cables. Opening measures approximately 2”x2” and are fastened to wall with screws (not included). Made from an indestructible UV stable, paintable plastic and suitable for indoor or outdoor applications.
$17.95
Triple cable scoops allows passage of up to four RG8 sized cables per side for a total of twelve. Comes with black mounting bracket, cable scoops, wall cover plate, and all necessary hardware. Can also mount to a double gang box. ***Each scoop of this device will pass 3 RG8 size cables with PL259’s easily, and a fourth cable of the same size with some effort. You can physically get up to 6 RG8 size cables through it without connectors.***
Using the mounting bracket as a guide. trace onto wall and cut out with a drywall saw. Make sure your cut lines are level!
Install mounting bracket in hole.
Attach by tightening included screws. “Wings” that are behind the bracket clamp the bracket to wall.
Attach cable scoop with included screws. Scoops can face IN or OUT.
Finally, put cover plate over scoop and attach with included screws. Done!
Installation is easy!
Tools needed: Keyhole or sheetrock saw, small level, phillips screwdriver, and flathead screwdriver. Takes 5 minutes.
1
2
3
4
5
5
1
2
3
Single entry scoop, horizontal
Triple entry scoop
-
•Protects cables
-
•Allows use of designer wall plates
-
•Versatile installation allows cable scoops to face IN or OUT
-
•When it’s time to go QRT for good, replace with a blank wall plate...no wall patching!
Installation is easy!
Tools needed: Keyhole saw, sheetrock saw, OR 3.5” hole saw, plus small level, phillips screwdriver, and flathead screwdriver. Takes 5 minutes.
Electrical tape
Liquid electrical tape
Zip ties
KB7ME’s clever use of the slotted entry cover plate in a home made window feed through panel.
10 pack, large, $9.95-18.95
Specifically sized for coax, rotor cable, and control lines, use our P shaped cable clamps for cable routing outdoors or indoors. Clamp is non-rusting aluminum with UV protected soft rubber cushion that prevents cable from being crushed or being pulled through clamp. Screws are stainless steel, 1.5” in length. Also available with masonry anchors for brick, block, concrete, or stucco. Requires a 1/4” masonry drill bit and (preferably) a hammer drill to install. Sold in 10 packs.
Choose the large size for RG-8, RG-213, Buryflex, LMR-400, DRF-400, RCS 18/12 rotor cable, RCH 16/18 rotor cable, or similar .400” diameter “large” coax cable.
Choose the small size for RG-8x, RG-58, RG-400, RG-142, RCM 18/22, or RC 6/18 or similar sized .25” diameter coax.
10 pack, small, $9.95-18.95
