By combining a gas-injected foamed dielectric with a dual foil and braid shield construction, BURY-FLEX™ provides the electrical and performance characteristics found in the more expensive 400-series coaxes as well as typical air dielectric type cables.  The Polyethylene (PE) jacket is durable enough for direct burial, yet flexible enough to be used for rotator loops.  The PE jacket also provides improved UV resistance compared to typical PVC jackets, significantly extending the life of your cable.  Takes standard PL259 connectors.

A less expensive alternative to 400 series coax, our 50 ohm RG-213 coax features a non-contaminating jacket, solid polyethylene dielectric, and copper braid with 97% coverage.  Center conductor is 12 gauge stranded copper.  Takes standard PL259 connectors.

Not to be confused with LMR-400, RG-400 is a small coax cable made for high performance and high power levels.  It sports a silver plated copper center conductor, solid teflon dielectric, and two silver plated copper braid shields, with semi-transparent tan colored jacket. Standard PL259 can be installed with a reducer found here.

DRF-400 low-loss 50 Ohm Coax is designed for ease of installation in areas where the physical requirements rule out the use of corrugated transmission cables and your application requires better performance than traditional RG-type single-braided cables.

9913-F7 is high quality low-loss 50 Ohm Coax.  A stranded center conductor allows for flexibility and ease of cable routing. The outer jacket is UV stable and non-contaminating for long life.  Dielectric is foamed HDPE.  Don’t confuse 9913-F7 with the original 9913, which had an air core and notorious for filling with water! 9913-F7 has foil and tinned copper braid shielding, and uses standard connectors.

This item ships direct from manufacturer within 48 hours of order.

LMR UltraFlex has a stranded center conductor and rubber outer jacket designed for multiple bending/flexing cycles. It is used for both indoor and outdoor applications.  .195” OD, black thermoplastic elastomer jacket, stranded copper center conductor, foamed polyethylene dielectric, tinned copper braid and foil shield.

Downloadable brochure with cable specs here:  LMR-195-UF.pdf

Ideal for drop-in replacement for RG-316/RG-174 jumper assemblies in wireless communications systems. .195” OD, black polyethylene jacket, solid copper center conductor, foamed polyethylene dielectric, tinned copper braid and foil shield.

Downloadable brochure with cable specs here:  LMR-195.pdf

Ideal for Jumper assemblies in wireless communications systems.  .240” OD, black polyethylene jacket, solid copper center conductor, foamed polyethylene dielectric, tinned copper braid and foil shield.

Downloadable brochure with cable specs here:  LMR-240.pdf

LMR UltraFlex has a stranded center conductor and rubber outer jacket designed for multiple bending/flexing cycles. It is used for both indoor and outdoor applications.  .240” OD, black thermoplastic elastomer jacket, stranded copper center conductor, foamed polyethylene dielectric, tinned copper braid and foil shield.

Downloadable brochure with cable specs here:  LMR-240-UF.pdf

Ideal for drop in replacement for RG-8/9913 air dielectric type cable.   .405” OD, black polyethylene jacket, solid copper center conductor, foamed polyethylene dielectric, tinned copper braid and foil shield.

Downloadable brochure with cable specs here:  LMR-400.pdf

LMR UltraFlex has a stranded center conductor and rubber outer jacket designed for multiple bending/flexing cycles. It is used for both indoor and outdoor applications.  .405” OD, black thermoplastic elastomer jacket, stranded copper center conductor, foamed polyethylene dielectric, tinned copper braid and foil shield.

Downloadable brochure with cable specs here:  LMR-400-UF.pdf

Ideal for RF transmission in wireless communications systems requiring low loss.  .590” OD, black polyethylene jacket, solid copper center conductor, foamed polyethylene dielectric, tinned copper braid and foil shield.

Downloadable brochure with cable specs here:  LMR-600.pdf

LMR UltraFlex has a stranded center conductor and rubber outer jacket designed for multiple bending/flexing cycles. It is used for both indoor and outdoor applications.  .590” OD, black thermoplastic elastomer jacket, stranded copper center conductor, foamed polyethylene dielectric, tinned copper braid and foil shield.

Downloadable brochure with cable specs here:  LMR-600-UF.pdf

Perfect for station jumpers and applications where flexibility and small diameters are needed.  Our RG 8X Low Loss coax is 50 ohm coax, features tinned copper braid, foil shield, 16 gauge center conductor, foam polyethylene dielectric, and PVC (type IIA) jacket.  Takes standard PL259 connectors with reducing adapter below.